JB/T 7646.2-2008 冲模模柄 第2部分:旋入式模柄
作者:标准资料网 时间:2024-05-04 08:05:25 浏览:8241
来源:标准资料网
基本信息
标准名称: | 冲模模柄 第2部分:旋入式模柄 |
英文名称: | Stamping die shanks-Part 2:Screwed die shanks |
中标分类: |
机械 >>
工艺装备 >>
模具 |
ICS分类: |
机械制造 >>
无屑加工设备 >>
模制设备和铸造设备
|
替代情况: | 替代JB/T 7646.2-1994 |
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2008-02-01 |
实施日期: | 2008-07-01 |
首发日期: | |
作废日期: | |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国模具标准化技术委员会 |
起草单位: | 桂林电器科学研究所;桂林电子科技大学 |
起草人: | 翁史振、廖宏谊、奉双 |
出版社: | 机械工业出版社 |
出版日期: | 2008-06-01 |
页数: | 5页 |
批文号: | 22982-2008 |
书号: | 15111·8907 |
适用范围
JB/T 7646的本部分规定了冲模旋入式模柄的尺寸规格和标记。 本部分适用于冲模旋入式模柄。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 工艺装备 模具 机械制造 无屑加工设备 模制设备和铸造设备
Product Code:SAE J588
Title:Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
Issuing Committee:Signaling And Marking Devices Stds Comm
Scope:This SAE Standard provides test procedures, requirements, and guidelines for turn signal lamps intended for use on vehicles of less than 2032 mm in overall width.【英文标准名称】:StandardGuideforServingProtocolforSensoryEvaluationofFoodsandBeverages
【原文标准名称】:食品和饮料感官评定用的服务协议的标准指南
【标准号】:ASTME1871-2006
【标准状态】:现行
【国别】:
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:E18.06
【标准类型】:(Practice)
【标准水平】:()
【中文主题词】:饮料;评定;食品;协议;感官;感官分析
【英文主题词】:foodsandbeverages;sensoryevaluation;servingprotocol
【摘要】:Thisguideprovidesgeneralguidelinesandrecommendationsforpresentingsamplestoassessorsforsensoryevaluation.Specificsituationsmayrequirevariationstotheseguidelines.1.1Thisguidedescribessuggestedproceduresforp
【中国标准分类号】:X04
【国际标准分类号】:67_240
【页数】:7P.;A4
【正文语种】: